www.modmy250.com is now live!

[CThunder-blue]

Originally Posted by CynicalC

It's not offensive to me at all, just weird. You can believe in whatever you want, and it's your right to tell the whole world about it. You could go out into the street and scream your beliefs out loud if you want, but you'd have more than a couple people tell you that it's inappropriate. There's a time and place for everything IMO.

And what makes you the authority on what's appropriate? You guys act as if I'm puttin up scriptures on every page trying to cram my religion down your throat. Simply put, if you don't care to see it, don't go to the page anymore. No one is twisting you arm. Heck, if no one ever buys a thing from the site, it won't hurt me one single bit at all. Everyone has a choice to shop where they want.

[zartan]

Good luck with your site! I am not Christian, the palsm quote didn't bug me. just saying!

[CThunder-blue]

Thanks Zartan!

[midknight]

Originally Posted by CThunder-blue

If people find my belief and faith offensive, then that's on them. I think it's funny that a sincere faith can be condemned or seen as offensive, but if I wrote something that supported gay rights, I'd be seen as a "cool" person. If anything, one would think that making a purchase from a person who believes that stealing is wrong and is a sin would also mean that they're not going to get scammed. I'm not out to make a million dollars from my site. Everything I sell on here, I sell on there and I don't expect I'll be getting much traffic from other forums. It's a side hobby and not much else. I just figured it'd be easier for people to go to the site and buy from there at their own convenience than to pm me and wait for a response. As a matter of fact, there's not one thing on that site that you can't make for yourself if you have the right tools for it.

If you really have a problem buying from someone because you don't agree with what they believe in, then I would suggest you're not as "open minded" as you think you are.

+1

[DarC]

Originally Posted by CThunder-blue

Dan, if you can get me dimensions of the stickers you want, I'm sure I could make some for you.

Will do, just need to figure out what I want to do. How are the options looking for a dark grey/gunmetal type vinyl? I will try to figure out the exact look I want and see if I can make a paint-chop.

[CThunder-blue]

Best I can find is a dark gray. I do have a reflective black vinyl that would look really good. It's closer to gunmetal, but in direct light, it's closer to a silver. You can see the reflection on my website.

Here's a pic of the dark gray:

[DarC]

Sent you an e-mail.

[kamikaze]

it's not like he's trying to ram his religion down your throats, if you're offended go somewhere else. I"m not the least bit religious, and I don't care what he puts on his website. until he tells me that he won't sell to me unless I start going to church on sunday i couldn't care less what he puts there. people are such babies these days

now, as far as the projector kits, I have no probs sourcing the projectors and doing the work myself, but what about maybe selling the carbon fiber plate (iirc, it's just a plastic plate with CF vinyl, right?)?

[CThunder-blue]

Yeah, I can sell just the plates. It's actually 2 plates. One is the mounting plate and the other one is just a cover plate with the CF vinyl. I would prefer to sell the plates and let you do the cutting since I can't measure out your projectors. If that's ok, I have no problems sourcing your the plates. It would probably be $15 shipped to Canada. I'd just be charging you what I'd pay + shipping.

[BlackNinja]

As a fellow believer in faith, I have no problems with the scripture. I just think it takes away a bit of professionalism in the site, that's all. When I'm on a certain site, I go there for it's particular site content (Whether it be ninjette.org, youtube, or redtube...). Regardless, it's not going to stop me from viewing your site or anything of that nature.

I'm currently using IE 7 (Old, I know, at work) and I'm having similar problems with the site as the dude using Opera. I'll see how it looks at home where I use Chrome.

[kamikaze]

Originally Posted by CThunder-blue

Yeah, I can sell just the plates. It's actually 2 plates. One is the mounting plate and the other one is just a cover plate with the CF vinyl. I would prefer to sell the plates and let you do the cutting since I can't measure out your projectors. If that's ok, I have no problems sourcing your the plates. It would probably be $15 shipped to Canada. I'd just be charging you what I'd pay + shipping.

fair enough, it's the outside shape that I'd want pre cut, I can make the holes for the projectors. IIRC, you used the Morimoto D2S projectors didn't you? I can't decide if I want to tear into this thing again and do any more major mods because I want to sell it and buy a bigger bike anyway.

[Jiggles]

Originally Posted by CynicalC

Why not come out of the stone age and use a modern browser like firefox or chrome? Opera is the least used browser in the world.

http://en.wikipedia.org/wiki/Usage_s...f_web_browsers

I'm sure I could find a statistic showing how few people drive Rolls Royce compared to a Ford Focus, doesn't mean the Ford is better. Opera starts up in about 3 seconds, saves all my tabs, and doesn't become a bloated resource hog like other browsers.

And by your statement you must use Internet Explorer correct? Since more than twice as many people use it compared to chrome it must be better!

[CThunder-blue]

Originally Posted by kamikaze

fair enough, it's the outside shape that I'd want pre cut, I can make the holes for the projectors. IIRC, you used the Morimoto D2S projectors didn't you? I can't decide if I want to tear into this thing again and do any more major mods because I want to sell it and buy a bigger bike anyway.

I can do the outside shape. That shouldn't be a problem! Just let me know if/when you're ready.

[EsrTek]

What about doing a gas tank cap decal/protector, is that possible??

[CThunder-blue]

A real protector wouldn't be possible for me. They're made of thick plastic. I just do vinyl decals. Sorry

[EsrTek]

NP can't hurt to ask right -- Thanks

How big of a decal can you make, provided it is only lettering?

[CThunder-blue]

up to 8.25" tall x 23" wide, or vice versa.

[jamesio]

Nice website dude!

Here are some pics of my ninjette.org decals. The green is spot on I love them on the bike

[CynicalC]

Originally Posted by Jiggles

I'm sure I could find a statistic showing how few people drive Rolls Royce compared to a Ford Focus, doesn't mean the Ford is better. Opera starts up in about 3 seconds, saves all my tabs, and doesn't become a bloated resource hog like other browsers.

And by your statement you must use Internet Explorer correct? Since more than twice as many people use it compared to chrome it must be better!

I used opera back when it was the best alternative to IE and netscape. Times have changed. Go ahead and keep using it if that's what you like, but you don't have much room to complain that it doesn't load your sites properly when there are so many better options available. No I don't use IE, but as a matter of fact I would use IE over Opera, given the choice.

[DarC]

Having a set of decals made up, I will post pics as soon as I get them and stick em on! Should look really cool with dark grey on a black bike.

Thanks Tri, you customer service is awesome

[CThunder-blue]

Thanks Dan. Can you confirm the size you want? That long size one is going to be really stretched. I just got the vinyl today so just waiting on confirmation of the sizes.

[DarC]

I think I can get a 7.4" x 1.2" decal to fit just right. Let me know if it will stretch too much. Thanks!

PS> I replied to your e-mail but am not sure if it sent or if you got it. I don't have g-mail here at work and my laptop took a blue screen of death to the face.

PSS> I'm stoked to see how this turns out.

[CThunder-blue]

Thanks Dan. Somehow, I missed your last reply. I'll get on it tonight. I'll cut out a sample to show you what it will look like and post it here. I never got another email from ya either. Not sure what happened there.

[DarC]

Originally Posted by CThunder-blue

Thanks Dan. Somehow, I missed your last reply. I'll get on it tonight. I'll cut out a sample to show you what it will look like and post it here. I never got another email from ya either. Not sure what happened there.

Eh, I chalk it up to me not sleeping and epic computer failure, lol. It's all good.

[BlackNinja]

Got some pics of my bike if you want to put them on your site. Do you want me to email them to you or what?

[CThunder-blue]

Sure. You can email them or post them here. My email for that is &armyof22000-salem&@&yahoo.com. Just remove the &.

[BlackNinja]

http://www.ninjette.org/forums/showthread.php?t=81465

I put some pics up there. Hope they are OK!

[CThunder-blue]

Awesome. Thanks J!

[00NissanNinja]

Nice site. When I finish my current little project I can give you some pics as well. I might want one of your y adaptors too.

[DarC]

Decals are in and on. Awesome work! They look great on the bike and I also got the scrap CF too, time to put it to the test Great CS and great quality of work. I hope mm250 takes off!

Pictures are here: http://www.ninjette.org/forums/showthread.php?t=81631

Let me know when the business cards are in, I could use a few to spread the word around here. I always seem to see N250's but no one riding them...

[headshrink]

Cool - I like to see these kinds of shenanigans

[kaiserz]

Tri, If you have time can you hook me up?

I need stickers/decals

black, if you can do a reflective black that'll be awesome.

and how much if I get myself a ninjette sticker too?


Thanks!

[Havok]

Can you do pictures in vinyl? Like logos? I want the NY Jets logo for football season and I want the dainese devil as well both in lime green vinyl. Is that possible?

[CThunder-blue]

Originally Posted by kaiserz

Tri, If you have time can you hook me up?

I need stickers/decals

black, if you can do a reflective black that'll be awesome.

and how much if I get myself a ninjette sticker too?


Thanks!

I can do reflective black, no problem. The total for all 3 sets (kawasaki, ninja, ninjette) would be $18 shipped. Keep in mind, the kawasaki, it's not a perfect overlay of the original. Not sure if you planned on trying to put them on top of the original decals on the tank.

Originally Posted by Havok

Can you do pictures in vinyl? Like logos? I want the NY Jets logo for football season and I want the dainese devil as well both in lime green vinyl. Is that possible?

I can do it, but it may take a while depending on the design. Can you pm me a pic of what you want? Do you just want one of each?

[kaiserz]

Yes sir, my plan is to put the kawasaki decal on top of original decal on the tank. if you have any idea how I can make it work, please let me know.

also, I only want a very small ninjette.org sticker



And tri is there a way for you to do this decals in black reflective?

[CThunder-blue]

I'll need to put some time into trying to make an overlay decal for the kawasaki. Problem is, you'll have to apply the individual lettering yourself. My vinyl cutter software can't put the letters as close as the kawasaki lettering. Let me know if you still want it.

I can resize the ninjette stickers to fit that space. It shouldn't be a problem.

I can do the image, but not the squiggly stuff under it. You want the white parts of the image in the reflective black right? How many do you want and what size?

[kaiserz]

Originally Posted by CThunder-blue

I'll need to put some time into trying to make an overlay decal for the kawasaki. Problem is, you'll have to apply the individual lettering yourself. My vinyl cutter software can't put the letters as close as the kawasaki lettering. Let me know if you still want it.

Yes I still want it and that'll be awesome!

Originally Posted by CThunder-blue

I can resize the ninjette stickers to fit that space. It shouldn't be a problem.

Ok thanks!

Originally Posted by CThunder-blue

I can do the image, but not the squiggly stuff under it. You want the white parts of the image in the reflective black right? How many do you want and what size?

Yes sir, the white parts as the reflective black. If I can get 2 that'll be awesome

For the size I'm gonna ask your expert opinion on that. My plan is to place the stickers on the tail.

[CThunder-blue]

I'll work on it this week.

[Havok]

Originally Posted by CThunder-blue

I can do reflective black, no problem. The total for all 3 sets (kawasaki, ninja, ninjette) would be $18 shipped. Keep in mind, the kawasaki, it's not a perfect overlay of the original. Not sure if you planned on trying to put them on top of the original decals on the tank.



I can do it, but it may take a while depending on the design. Can you pm me a pic of what you want? Do you just want one of each?

I'll post up pics of the logos when I get home today

[kaiserz]

Sweet! thanks tri!