|
March 10th, 2016, 03:52 PM
|
#1 |
|
ninjette.org member
Name: Thom
Location: Virginia
Join Date: Dec 2014 Motorcycle(s): 2013 zx6r and 1995 250r Posts: 69
|
Rebuilding the bike and new issue...
So my bikes been apart for over a year. It's a slow rebuild based on money and spending time with kids and family. So I changed the headlight removed the gauge cluster removed the handbrake and clutch lever (they are still off). I replaced the petcock on the tank and rebuilt the carb. I'm more then positive everything was put back together but I wanted to start it today to make sure 1) the new peacock didn't leak like the old and 2) make sure the carb didn't gunk up again.
When I went to start the bike I got nothing. No click or anything however the headlight and turn signals work. The battery is on a tender so it is charged. Would not having the clutch lever on cause this issue or not having the brake level on? Also is there something in the electrical system connected to the gauge cluster that could be causing this? Am I just rushing to conclusions? Thanks for the help guys and gals
__________________________________________________
spend all the spare time on two wheels |
|
|
|
March 10th, 2016, 04:29 PM
|
#2 |
|
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Check the 3 main safety switches, clutch, side stand and neutral. Hopefully it's one of those and a simple fix. Not getting the bike in N does concern me though...
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
|
|
|
March 10th, 2016, 04:31 PM
|
#3 | |
|
ninjette.org member
Name: Thom
Location: Virginia
Join Date: Dec 2014 Motorcycle(s): 2013 zx6r and 1995 250r Posts: 69
|
Quote:
__________________________________________________
spend all the spare time on two wheels |
|
|
|
|
 |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| what to consider when rebuilding an engine? | MrAtom | General Motorcycling Discussion | 15 | April 22nd, 2015 09:50 PM |
| Bike issue | checho323 | General Motorcycling Discussion | 3 | July 17th, 2014 10:21 AM |
| Rebuilding Questions | eulark | 1986 - 2007 Ninja 250R Tech Talk | 171 | September 19th, 2013 05:58 PM |
| Rebuilding a motor... | saber63 | 1986 - 2007 Ninja 250R Tech Talk | 3 | May 16th, 2011 11:42 AM |
| Have a lean issue with my bike, issue with coasting enricher. | twiggy2cents | 1986 - 2007 Ninja 250R Tech Talk | 7 | February 24th, 2010 06:54 PM |
| Thread Tools | |
|
|
