August 30th, 2013, 08:06 AM | #1 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Pregen to Newgen Wheel conversion
I need the following as of now;
Front end; forks triples caliper stock bars Rear swing arm Rear caliper Rear brake res. Lemme know what you got for sale. Thanks!
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
August 30th, 2013, 09:12 AM | #3 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Need prices, I know my budget will not allow me to buy everything in one shot.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
August 30th, 2013, 01:43 PM | #4 |
ninjette.org certified postwhore
Name: Inderveer
Location: San Jose
Join Date: Nov 2012 Motorcycle(s): '07 ex250-F/J Posts: A lot.
|
I've been looking into this conversion too, but like Chris, I needa know how much it would probably cost..
|
|
August 30th, 2013, 02:01 PM | #5 |
wat
Name: wat
Location: tustin/long beach
Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much.
Blog Entries: 5
MOTM - Oct '12, Feb '14
|
ummmmm... ok... i'll put prices and you tell me
forks - $200 -- edit: i kinda don't really want to sell the actual forks though... so i may have to keep these........ maybe. triples - $20 caliper - $50 stock bars - $40 Rear swing arm - $50 Rear caliper - $50 Rear brake res - just the res? you can have it with the caliper... do you need the MC? plus shipping from california.
__________________________________________________
|
|
August 30th, 2013, 02:05 PM | #6 |
sail away
Name: Jon
Location: San Jose
Join Date: Jul 2012 Motorcycle(s): gixxer (sold), ninjette (upgrade!) Posts: 964
Blog Entries: 8
|
Grand Opening:
Alex.S's Ninjette Graveyard
__________________________________________________
Unregistered found this post helpful. Track Day Preparation Checklist 1. Financial 2. Mental 3. Physical 4. Gear / Bike |
|
August 30th, 2013, 02:23 PM | #7 |
ninjette.org certified postwhore
Name: Inderveer
Location: San Jose
Join Date: Nov 2012 Motorcycle(s): '07 ex250-F/J Posts: A lot.
|
So, the whole front/rear end would probably cost about $500..w/o wheels? How much extra would wheels be?
|
|
August 30th, 2013, 02:29 PM | #8 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Those prices are a bit high for my area. But your prices on the front are cheaper than my area. Go figure... Are you keepin' da front?
Wheels can be had for about 3 bills. I lucked a set for $100 but had to drive an hour to get em.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
August 30th, 2013, 02:35 PM | #9 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
I am setting up my google alerts and already getting hits. I like to buy from other riders though. You know... a support your support system kinda thing.
But here is a pretty good deal. http://www.ebay.com/itm/300952442861
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
August 30th, 2013, 02:45 PM | #10 |
ninjette.org certified postwhore
Name: Inderveer
Location: San Jose
Join Date: Nov 2012 Motorcycle(s): '07 ex250-F/J Posts: A lot.
|
Thanks for all the info guys. Can't wait until I start this project!
|
|
August 30th, 2013, 03:33 PM | #11 |
Ninja Parts Master
Name: Dan
Location: Houma, Louisiana
Join Date: Aug 2013 Motorcycle(s): 2011 Ducati Streetfighter 1098, 2014 Honda CB1100 Cafe, 2007 SV1000S, Quite a few 2008-2012 Ninja 250s Posts: 366
|
I have all of the parts you could ever dream of. Give me a week and they will all be up on my site. I price everything lower than I see it going for on ebay, so give me a few days and hopefully the prices will be to your liking.
|
|
September 3rd, 2013, 01:24 PM | #12 |
Ninja Parts Master
Name: Dan
Location: Houma, Louisiana
Join Date: Aug 2013 Motorcycle(s): 2011 Ducati Streetfighter 1098, 2014 Honda CB1100 Cafe, 2007 SV1000S, Quite a few 2008-2012 Ninja 250s Posts: 366
|
The forks on live on my site now, the other parts will be listed within the next few days.
www.oemninjaparts.com ,all of the prices include shipping in continental US. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Planning a NewGen swingarm conversion | lolibater | 1986 - 2007 Ninja 250R Tech Talk | 32 | May 25th, 2024 04:47 AM |
Newgen exhaust on pregen? | !!(0_o)!! | 1986 - 2007 Ninja 250R Tech Talk | 26 | April 16th, 2013 08:26 PM |
pregen engine in newgen? | alex.s | 2008 - 2012 Ninja 250R Tech Talk | 6 | October 19th, 2012 11:09 PM |
Are the newgen and pregen cranks the same? | n4mwd | 2008 - 2012 Ninja 250R Tech Talk | 2 | July 26th, 2012 12:27 PM |
Pregen vs. Newgen | ambudriver | General Motorcycling Discussion | 7 | May 7th, 2011 07:36 PM |
|
|